3 pc Stand Mount Tool Set Ford Rearend
Sale Price:
$57.99
"Easily dismount/mount Ford 8"" and 9"" rear Differentials - This tool sure beats catching 70 pounds of differential gears with your person. Adapts your 2 ton trolley jack with 1-1/8"" or 1/2"" saddle mounting hole to remove/install differentials. Also includes a bench vice adapter. Made in the USA. Can also be used to remove complete rear axle assemblies (without wheels)."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
302 Ford Long Block
Sale Price:
$299
"Lightweight 302 Ford Long Block - This engine will never run, but it sure makes a great display and works well for anyone setting up a street rod or race car chassis for motor and transmission mounts, steering and header clearances, and more. This authentic plastic reproduction weighs less than 24 lbs. Think of the time you'll save using this lightweight compared to a cast iron original! This long block (with heads attached) incorporates metal threaded inserts to bolt on headers, intakes, valve covers, timing cover, water pump, engine mounts and oil pan."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
350 Turbo Transmission
Sale Price:
$259.9
"Lightweight Turbo-Hydramatic 350 Transmission - This transmission will never run, but it sure makes a great display and works well for anyone setting up a street rod or race car chassis for motor and transmission mounts, steering and header clearances, and more. This authentic plastic reproduction weighs less than 10 lbs. Think of the time you'll save using this lightweight compared to a cast original! This transmission incorporates metal threaded inserts to bolt on mounts and oil pan. Removable 6"" extension makes it easy to bolt on alternate extensions. Bolts directly on to 350 Chevy Block."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
454 Chevy Long Block
Sale Price:
$399
"Lightweight 454 Chevy Long Block - This engine will never run, but it sure makes a great display and works well for anyone setting up a street rod or race car chassis for motor and transmission mounts, steering and header clearances, and more. This authentic plastic reproduction weighs less than 22 lbs. Think of the time you'll save using this lightweight compared to a cast iron original! This long block (with heads attached) incorporates metal threaded inserts to bolt on headers, intakes, valve covers, timing cover, water pump, engine mounts and oil pan."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
460 Ford Long Block
Sale Price:
$399
"Lightweight 460 Ford Long Block - This engine will never run, but it sure makes a great display and works well for anyone setting up a street rod or race car chassis for motor and transmission mounts, steering and header clearances, and more. This authentic plastic reproduction weighs less than 24 lbs. Think of the time you'll save using this lightweight compared to a cast iron original! This long block (with heads attached) incorporates metal threaded inserts to bolt on headers, intakes, valve covers, timing cover, water pump, engine mounts and oil pan."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
6 Gallon Oil Drain w/Castors
Sale Price:
$89.99
"Changing your oil on a lift? If you're fortunate enough to have a lift, you shouldn't be without a professional oil draining system. This 6-gallon capacity drain easily rolls on 4 ball bearing casters to exactly where you need it. The 9 1/2"" funnel top adjusts from 48"" to 67"" to help prevent messy spills. Durable non-rusting translucent Polyethylene holding tank makes it easy to prevent over filling. Optional Drain Pan (43247A) provides a larger collection surface to make draining transmissions neater. Made in the USA. One year warranty."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
8 pc Fuel & Trans Line Disconnect Tool Set
Sale Price:
$29.99
8 Pc. Fuel & Transmission Line Disconnect Tool Set - Use the right tool for the job. Avoid damaging critical pressurized fuel and transmission line fittings. This set contains the correct tools to separate the quick-disconnect fittings on fuel and transmission lines on many 1986 and newer domestic cars. Made in Taiwan. One year limited manufacturer's warranty.
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Air Tube Cover Kit
Sale Price:
$49.99
"Intake Air Tube Cover Kit from DEI - High density cold intake air maximizes volumetric efficiency for improved performance. This air tube cover, made from heat treated fiberglass with a reflective coating, can be installed/removed in seconds with a full length hook & loop closure system. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
1
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Automotive Stethoscope
Sale Price:
$9.99
"Automotive Stethoscope - Locate noisey valve train components, worn gears, piston slap, failing bearings and more with this precision listening device. 3-1/2"" long listening probe includes an 8"" extension to listen for mechanical sounds in recesses. Imported."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Brass Mallet 1 1/2 lb
Sale Price:
$14.99
Gentle Persuasion. Avoid damaging your more fragile parts when hammering by using this 24 oz. brass hammer. Features a high-impact fiberglass shaft with a cushioned handle.
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Cool-Tube Wire/Line Protector 1/2"x 15'
Sale Price:
$64.99
"Cool-Tube Wire and Line Protector from DEI - Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from convoluted Nylon and covered with aluminized fiberglass fabric. Reduces temperatures about 43%. Covers are slit lengthwise for easy installation. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Cool-Tube Wire/Line Protector 3/4"x 15'
Sale Price:
$69.99
"Cool-Tube Wire and Line Protector from DEI - Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from convoluted Nylon and covered with aluminized fiberglass fabric. Reduces temperatures about 43%. Covers are slit lengthwise for easy installation. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Cool-Tube Wire/Line Protector 3/4"x 3'
Sale Price:
$25.99
"Cool-Tube Wire and Line Protector from DEI - Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from convoluted Nylon and covered with aluminized fiberglass fabric. Reduces temperatures about 43%. Covers are slit lengthwise for easy installation. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Crankshaft EZ Spin
Sale Price:
$24.99
"During engine re-assembly, or while performing a major tune-up and valve adjustment, precise positioning of your eninge is critical. This tool bolts to the puller holes on your engine's harmonic balancer and allows you to rotate the engine using your 1/2"" breaker bar or ratchet. The tool's outside diameter is 4 3/8"" and 6 oblong slots allow it to be used on almost any engine. Also comes with three 3/8"" x 24 grade 8 bolts for use on most domestic vibration dampers."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Drain Pan For Oil Drain 24"x24"
Sale Price:
$24.99
The Transmission Drain Pan fits securely in the mouth of the (43247) Oil Drain with Casters funnel. The larger draining surface provided minimizes transmission oil spills. Made in the USA. One year manufacturer's warranty. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Dual Gauge Leakdown Tester
Sale Price:
$119.9
"Professional Dual Gauge Leakdown Tester - Diagnose bad rings, leaky exhaust or intake valve, or gasket leaks. Dual Gauges in a quality anodized billet aluminum body allow for precise calibration and easy reading. Includes adjustable left-hand gauge, precision regulator, easy to read right hand gauge, 14mm hose end, and instructions. Limited 90 day manufacturer's warranty. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Engine Leveler
Sale Price:
$59.99
"Sturdy leveler makes engine removal and replacement a one-person operation. Engine angle can be adjusted from either end during the operation with a 11/16"" socket or wrench. Rugged beam is constructed of 1/2"" diameter steel plate and features 1/2"" ACME threaded rod and all-welded link chain. Unit boasts a 1500 lb. rating."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Engine Lift Brackets One Pair
Sale Price:
$9.99
"Designed to work in conjuction with your engine leveler and hoist to make the job easier. They have 1/2"" hole on the engine end and a 1"" hole on the hoist end. Heavy-duty metal; 7"" long."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Engine Lifting Plate
Sale Price:
$17.99
"With its 1,200 lbs capacity, this lifting plate allows the engine and trans- mission to be removed together. Using the carburetor bolt holes, it will handle V-6s and V-8s with Carter AFB, Edelbrock, Holley 2 and 4 bbl., most Ford 2 bbl. manifolds. The three-hole bracket accommodates a wide lifting angle range."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Flywheel Turner
Sale Price:
$12.99
Turning an engine over to remove clutch or torque converter bolts is tough. Stop using an old rag and prying with that old bent screw-driver! Get the right tool!
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Harmonic Balancer Installer
Sale Price:
$39.99
"Don't risk altering the crankshaft end play by pounding the harmonic balancer into place! This tool supplies the steady force needed to correctly mount the Balancer on the crankshaft. The 8 adaptors (7/16""x20"", 1/2""x20"", 9/16""x18"", 5/8""x18, 3/4""x16, 12mmx1.50, 14mmx1.50, 16mmx2.0) will fit both domestic and foreign cars. Requires 1 1/4"" capacity wrench. Replacement adapters available (7/16"" x 20). Limited 1 year warranty."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Heat Sheath Aluminized Sleeving (Sewn) 3/4" x 36"
Sale Price:
$14.99
"Heat Sheath Aluminized Sleeving from DEI - Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from high temp aluminized fiberglass fabric sewn into a tube. Reflects up to 90% of the heat. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
Heat Sheath Aluminized Sleeving (Sewn)1-1/4"x 36
Sale Price:
$18.99
"Heat Sheath Aluminized Sleeving from DEI - Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from high temp aluminized fiberglass fabric sewn into a tube. Reflects up to 90% of the heat. Made in the USA."
(Added:
Sat Jul 31 2004
Hits:
0
Rating:
0.00
Votes:
0
)
Rate ItReview ItDetails
